Signage Hooks & Lattice Hooks and Lattice
Questions? Call Toll Free: 1-888-919-7446
 
 

30" Medium Duty GroundTech Ground Spike 4X4 Post

Code: 
L12-GM-30
Price:  
$24.85
Availability:  
Usually ships in 2-3 business days
Dimensions:  
4x4 Wooden Post:
3 5/8" x 3 5/8"




Hooks and Lattice now offers GroundTech® Ground spikes for 4X4 posts.  This 4X4 ground spike system is strong, economical and easy to install.  GroundTech® Ground spikes for 4X4 posts is a great solution because it installs in minutes not hours and is great way to enhance the beauty of your outdoor landscape with mail boxes, birdhouses and birdfeeders, decorative planters, trellises, garden arches and lamp posts.  Great solution for  in a fraction of the time that it takes to install traditional post systems.   The GroundMaster® system uses heavy gauge steel sockets that resist corrosion and blend well with outdoor surroundings.

Enhance the beauty of your outdoor landscape with mailboxes, birdhouses and feeders, decorative planters, trellises, garden arches, and lamp posts.
Enjoy the fun of outdoor games and sports –  volleyball and badminton
Use to install patio fencing, wire fences, tree stakes, firewood stackers, composters, and signs.

NO DIGGING HOLES OR MIXING CONCRETE

30”   Post Systems
Great for signs, wire fences, decorative planters and mail boxes
 Install decking, retaining walls, small fences and large signs, steps, storage sheds, piers, and carports

4x4 Wooden Post:
3 5/8" x 3 5/8"
1 – Ideally, locate post on a flat or level surface. Realize the base of the GroundMaster Post will not sit flush to the ground if you mount you post on an incline.

2 - Place a short 4x4 post, about 2” longer than collar depth, into post system collar (you will use this to pound the spike into the ground.

3 - Using a sledge hammer, strike the short 4x4 post.

4 - After a few strokes, check for vertical alignment with a level so that you sign, when mounted will be upright.

5 - Continue striking the post until collar is flush with the ground.

6 - Remove short post. Place the actual post into the collar.

7 - Check to ensure that the post is vertical.

8 - Insert the bolts supplied. Tighten to hold the post securely. DO NOT OVERTIGHTEN BOLTS.

To Remove Post System (For temporary installation and when spike is to be removed):

1 - Remove some of the ground from around the collar area.

2 - Insert a pry bar on 4x4 post under collar.

3 - Place another short 4x4 post under the pry bar or post for leverage to “pry” spike from ground.

4 - Push downward on the pry bar to safely release the spike from the ground. Spike may be reused in another application.






 
OUR COMPANY SHOPPING SERVICES CUSTOMER SERVICE RESOURCES & LINKS STORE DEPARTMENTS
OTHER SPECIALTY PRODUCTS