Our anodized aluminum stand-offs are suited for exterior or interior applications. The anodized finish helps the stand-offs resist hazing and weather related wear in outdoor applications. Available in several diameters and barrel heights our anodized aluminum stand-offs are an excellent way to display your signage, art, menuís, wayfinding or mounted documents. These stand-offs are sold individually and typical applications use one stand-off in each corner of the item to be mounted. For pieces over 4 sq ft additional stand-offs may be required (installed midway between corners or approx. every 12" - 18" along the edges). Each stand-off consists of four pieces - a cap, a cap stud, a barrel and a wall anchor/stud.
Please note: Each 3/4" diameter stand-off ships with a default "Cap Stud" length that will accommodate a panel up to 1/4" thick (for 1/2" H Barrels) or up to 1/2" thick (for 3/4" and 1" H Barrels). If your item to be mounted with the 3/4" diameter stand-offs is thicker than the spacing listed please call for details on other Cap Stud length options.