46" Verona Illuminata Hanging Sign Bracket

Main bracket arm: is 46" wide overall (includes 3" dia. Ball Finial on end of arm)

Mounting Plate: 3"x29" with a 3/8" dia. hole pre-drilled in each corner* wiring will exit the back plate behind the main arm location and assumes you will have a flush mounted j-box at that location.

Ring Centers: 22" on center (light fixture extension arms are centered between these rings)
Center of ring closest to the wall is 12" from the back plate

Space between bottom scrolls: 36"

Space from edge of mounting plate lower scroll to center of first ring: 8 3/4"
(Sign must drop down min. 3.5" from bottom of rings to avoid lower scroll work)

Extension arms for the light fixtures project out: approx. 12" from main arm (alternate arm lengths are available)

Included light fixture housings: approx. 5.5" long x 3" diameter (note: Par 20 bulbs not included)

Bracket only weight = 20.15 lbs

Download the Product Specification.pdf by clicking on the link above for more details.

*Due to the wide range of installation surfaces this item can be applied to and varying local code requirements for electrical connections, installation hardware is not included. We recommend that you have a qualified electrician or sign professional perform the installation and they will determine the appropriate electrical and mounting hardware to be used for your specific application and/or local code requirements. It is also recommended that you check with your landlord, property management company or local officials first to determine if this type of illuminated sign system can be installed at your desired location?