Home & Garden
Commercial Planters & Artificial Plants
Signage & Lighting
 
 

Fire Retardant Trees | Flame Retardant Trees | Fire Retardant Artificial Trees

Flame retardant trees are now safer than before due to the availability (and requirement) of fire retardant artificial foliage. The majority of states have authored fire codes to protect consumers from the risks associated with flammable products and commercial grade artificial foliage is no different. The indoor artificial trees and hedges offered by Planters Unlimited have the fire retardant chemicals impregnated in the branches and leaves during the injection molding process. Fire retardation impregnated in the artificial foliage is not only safer and more resilient but more attractive as trees that have a topical application (dipped or sprayed) frequently have a spotty or discolored look and a tacky surface which can attract dust. Rely on Planters Unlimited's fire retardant trees for your hotel, restaurant or lobby area - we have project managers available to assist you with design, pricing and shipping details. Call 1-888-320-0626.

Inherent Fire Retardant



Fire Retardant Palm Trees and Bamboo
 
Fire Retardant Oak and Willow Trees
 
Fire Retardant Ficus Trees
 
 

Fire Retardant Foliage FAQ's

Why are fire resistant plants with flame resistant foliage important?
Historically, many fires have been caused by a lack of fire resistance in silk or artificial plants, which are often used in commercial spaces for maintenance and durability reasons. In all of these cases the fires could have been prevented with properly manufactured fire retardant plants and trees. Fortunately, the majority of states now have fire codes for commercial artificial plants to help stop fire related accidents and injuries.

What makes non fire resistant silk plants so dangerous?
Silk foliage branches are made from plastic and polyester fabric. As you might suspect, fabric is easily susceptible to ignition and the plastic burns quite easily. So when ignited, silk plants can spread a fire quickly and the plastic can produce a large amount of deadly smoke.

Who determines whether silk plants must be fire retardant? 
The majority of states have adopted state fire codes that specifically address the laws concerning the use of artificial plants and the fire test requirements they must pass.

What fire resistant tests are required for silk plants? 
The fire tests required can depend on a number of factors but the most commonly cited fire tests are the NFPA 701 and the ASTM E84. Both of these tests are cited by the most adopted state fire codes which are the International Fire Code and the NFPA 1 Fire Code.

What do the silk plant fire tests measure? 
Depending on what test is performed, the test measures the flame propagation and the smoke generation of the material. This data is measured in order to answer a few questions; 1) if the product were to ignite, will the product self extinguish or will it spread the fire and 2) if the product were to ignite how much smoke is created from the product burning.

Who enforces the use of fire resistant silk plants? 
The local fire official having jurisdiction over the project will enforce the building fire code requirements and ensure products comply with the code.

How does the fire official ensure products comply with the code? 
The fire official will require that the product manufacturer supply the appropriate fire test certificate that complies with the fire code. In addition, the fire official may perform a field fire resistance test on the product to validate the certification.

What if I installed non fire resistant plants but they are required? 
From experience, this can be a costly mistake depending on what the fire official requires from you to remedy the situation. The most common scenario we have experienced is the fire official will require all the fire resistant product be removed and replaced with compliant products. This is not only costly because the product must be remade, but can really be costly if the project will not be allowed to open without compliant products.

How is artificial foliage made fire retardant? 
There are two ways to fire retard artificial foliage. The safest and most effective way is to make the foliage fire resistant during the injection molding process. This process blends the fire retardant chemical with the fabric and plastic or PVC parts while the materials are still in raw material form. Once injected, the fire protection is inherent (IFR™ - Inherently Fire Retardant) in the leaves and branches. The other process for fire retarding foliage is a post-production application in which the foliage is treated by spraying or dipping the foliage in fire retardant chemical. See a side by side comparison of these fire safe plant applications to learn more about IFR™

IFR™ (Inherently Fire Retardant) [Pro's]

Topically Treated Fire Retardant Foliage [Con's]

Fire safe chemicals impregnated into the 
plant materials during manufacturing

Will not wash or wear off

Consistent fire protection - California Title 19, US Gov SIN 4722-06, ASTM E84-95 Class A, NFPA 701, NFPA 705

Structurally sound fire retardant plants and trees;  premium grade fire safe plant materials withstand commercial application.

Smooth surface reduces dust build-up

Visually identical compared to standard foliages

Treated by spraying or dipping it in topical fire retardant chemicals

May wash or wear off and requires periodic reapplication

Inconsistent fire protection for artificial plants

May degrade materials, resulting in a wilted appearance

Tacky surface film attracts dust

Appearance may have a spotty or discolored film

 

 

FAQ's courtesy of Commercial Silk



 
OUR COMPANY SHOPPING SERVICES CUSTOMER SERVICE RESOURCES & LINKS STORE DEPARTMENTS

Google+
Cards