Never worry about your business signage again with the standard wall bracket hanging hardware kit. Designed for blanks that are a minimum of ½" thick substrate, this eyehook and chain system can hang PVC, wood or HDU substrates easily. The standard sign hardware package comes with
- (4) Black oxide coated "S" hooks - black oxide/oil finish
- (2) Stainless steel 2 3/16"L x 0.225 lag eye screws - black oxide finish
- One foot 12 gauge zinc single jack chain - black
Cut chain into two pieces, to desired length – 3-4" is the most visually appealing drop from sign bracket to sign blank. All components are made from steel that are then treated with black oxide to resist weather and moisture. The rare black oxide coating makes the kit a great choice for outdoor signage and gives a nice matte finish on the hardware that will never come off. "S" hooks can be clamped shut to prevent theft, vandalism and provide extra stability in the wind.
"S" Hook - 1.5" long x 1" wide (open)
Chain - 12 Gauge x 1 ft (approx. 14 links)
Lag Eye Screws - 2 3/16" long x .225" thick
Please note: the "S" Hooks in this kit are shipped in the "open" position and must be "closed" by the installer (typically done with pliers or vice grips) during installation to ensure that the chain or "S" Hooks do not come off during breezy conditions or if touched by passersby. In addition, the 1 foot length of chain supplied is intended to be cut (or untwist a link(s)) into two shorter equal length pieces (typically 3" to 4" each) to provide proper clearance from top of sign to bottom of bracket arm. If you have any questions regarding proper installation of this or any of our hardware products please call prior to installation. We're happy to assist with any questions you might have.