Add charm to your in-store signage by hanging it high! Designed to screw directly into the ceiling, the heavy duty ceiling bracket hardware kit is perfect for hanging your indoor signage. The black oxide coating on the outside makes it great for outdoor use also and you won't have to refinish your hardware ever. The kit comes with two long eyehooks for screwing into the ceiling, and two smaller eyehooks for hanging the sign blank. The chain is approximately a foot long and is to be divided in half to hang the blank. While this hardware kit is extremely heavy duty, it's a little too heavy duty for many signs. Please be sure that your sign substrate is at least 1" thick before applying these fittings. Works well with HDU, cellular PVC and wooden sign substrates. For questions regarding your specific sign compatibility feel free to call one of our in-house representatives for advice.
"S" Hooks - 1.5" long x 1" wide (open)
Chain - 8 Gauge x 1 ft (approx. 10 links)
Lag Eye Screws - 4 " long x 5/16" thick and 2 7/8" long x .306" thick
Please note: the "S" Hooks in this kit are shipped in the "open" position and must be "closed" by the installer (typically done with pliers or vice grips) during installation to ensure that the chain or "S" Hooks do not come off during breezy conditions or if touched by passersby. In addition, the 1 foot length of chain supplied is intended to be cut (or untwist a link(s)) into two shorter equal length pieces (typically 3" to 4" each) to provide proper clearance from top of sign to bottom of bracket arm. If you have any questions regarding proper installation of this or any of our hardware products please call prior to installation. We're happy to assist with any questions you might have.