Present your banners in an elegant way with our "trapeze" style banner brackets. Suitable for indoor or outside applications, these brackets have a built-in tensioning system that helps to minimize bowing or wrinkling common to banner installations.
Trapeze style banner brackets can also be fitted with small bullet lights or, for larger banners, a gooseneck style shade. Each pair is built-to-order to ensure it meets your project requirements.
For questions or custom orders, call customer service at
7am - 5pm PST, M-F
Typical Dimensions for Standard Trapeze Banner Brackets are:
- 6"x6" back plate and 3/8" hole in each corner
- 1.5" dia. Round main arm (34" long in version shown above) and 1" dia. Round banner arm (28" long in version shown above).
- Banner arm of 28" is designed to accommodate a 24" wide banner without installation hardware interfering
- Lighted version typically has a 3"x5.5" bullet style light fixture with 50W halogen bulb (also available in low [12V] volt version). Each fixture is connected to the main arm via 8" extension coupling (version above is shown with optional 7" dia. Angle shades).
Most of the above dimensions are customizable – please call for details or send us your specs.