Ensure that your sign is visible 24/7 by using our Triangle Ball Lighted Sign Bracket Kit to hang it. With its double bullet lights, this all-welded steel bracket and light set illuminates the sign to ensure that it can be seen in all types of conditions during all hours of the day. On the end of the arm is a 3-inch iron ball, which has a black powder coated finish like the rest of the bracket. The lighting comes in your choice of PAR20 120-volt or MR16 50-watt lights. A low voltage transformer is included with the halogen MR16 option.
If you'd prefer a low-voltage light option, use the drop-down box to the right of the image above to change your lights from a standard PAR20 (120V) version to the MR16 low-voltage option. Please note: the low voltage version of this fixture does include a 50W Halogen 2-pin bulb. A 120v to 12V transformer is required for all low voltage fixtures (included with this option). (Please note: the 120V standard fixtures do not ship with bulbs. These fixtures will accept a PAR20 Medium Base Floodlight commonly available at most hardware or home improvement stores).
Call us for details or to discuss your project requirements.
1-888-919-7446 (We're here M-F, 7:00am-5:00pm PST)
Main bracket arm is 30" wide overall (includes 3" dia. Ball Finial on end of arm)
Mounting Plate: 3"x 12" with a 3/8" dia. hole pre-drilled in each corner* wiring will exit the back plate behind the main arm location and assumes you will have a flush mounted j-box at that location.
Ring Centers: 14" on center (light fixture extension arms are centered between these rings)
Center of ring closest to the wall is 8" from the back plate
Extension arms for the light fixtures project out approx. 12" from main arm (alternate arm lengths are available)
Included light fixture housings are approx. 5.5" long x 3" diameter (note: Par 20 bulbs not included)
Bracket only weight = 5.55 lbs
Download the Product Specification.pdf by clicking on the link above for more details.
*Due to the wide range of installation surfaces this item can be applied to and varying local code requirements for electrical connections, installation hardware is not included. We recommend that you have a qualified electrician or sign professional perform the installation and they will determine the appropriate electrical and mounting hardware to be used for your specific application and/or local code requirements. It is also recommended that you check with your landlord, property management company or local officials first to determine if this type of illuminated sign system can be installed at your desired location?