Window Box Size: 72"L x 8.0"W x 8.0"H (not
including trim on top & bottom of box)
Exterior Box Dimensions including Trim: 74.5"L x 9.75"W x 8.75"H
Interior Planting Dimensions: 71"L x 6.75"W x 7.5"H.
window boxes look best when sized to the outer edge of
your window trim or midpoint of your shutters.
Please call us if your require a custom length 800-896-0978
Add (2) 32" Drop-In PlanterWell Reservoir by using the drop-down menu above the "Add to Cart" button.
These rectangular "PlanterWell" Self Watering Reservoirs are a perfect
solution to make your new or existing window boxes or planters easier
With our wide selection of sizes and custom configurations
"PlanterWell" self watering reservoirs can be designed to irrigate
almost any size window box or planter. Each "PlanterWell" self watering
reservoir can be used by itself or in conjunction with other "Planter
Well" self watering reservoirs to create a self irrigating window box
Not only do "PlanterWell" self watering reservoirs reduce the times
that a planter needs to be watered it also improves plant growth and
reduces water usage. Each PlanterWell will irrigate 9" of soil beyond
Click Here for our guide to installing Cleat Mount Composite Window Boxes.
Installation guidelines can be found by clicking on the link named "Installation Guides" in either the dark green band at the top of each page or the light blue link in the left margin at the bottom of each page.
Please Note: We sell mounting bolts for our composite window boxes separately and can be found on the right side of each product page or on our "Window Box Brackets & Bolts" web page. The reason we don't automatically supply bolts and hardware is due to the many different types of walls and siding used throughout the U.S. Your bolt requirements will vary based on the type of wall or siding your home or office has. All of our "Standard" size composite window boxes come with an innovative cleat mounting system that allows you to mount the single composite cleat to your home and then neatly hang the window box. All of our Iron and Aluminum window box cages and hayrack troughs come with pre-drilled 1/4" holes on the back of the cage. Mounting brackets that offer both structural support and add decorative detail are available but also sold separately.
For composite window boxes we recommend you mount them directly to your wall (vs. a bracket) using 3/8" diameter X 3 1/2" long bolts for wood and stucco siding but only when fully secured to the framing studs inside of the wall. Lag shields should be added with the lag bolts when mounting in brick, masonry or block.
For Iron Cages, Aluminum Cages and Hayrack Trough Window Baskets, we recommend (and sell separately) 1/4" diameter x 3" long lag bolts (and of course lag shields for brick, masonry or block).
We urge you to consult your local hardware store, handyman or licensed contractor for more specific direction if required.