Home & Garden
Commercial Planters & Artificial Plants
Signage & Lighting
 
 

Gooseneck Light Aluminum - 54.25" x 3/4" Dia. Arm with 18" Barn Light Shade

Code: 
SL8-AE10-BRN18
Price:  
$366.99
Ships In:  
Usually ships in 2-3 weeks
Availability:  
In Stock
Dimensions:  
Arm: 54.25” x 18" Ht
Light: 18”Dia. x 12” Ht

Add rustic charm to commercial lighting design with this 18" Barn Light Shade and arching gooseneck arm combination. Made to order, each gooseneck fixture is constructed out of commercial-grade aluminum with a rust resistant powder coated finish. Choose from more than 20 different colors for a custom look. Attractive accessories like cast guards and decorative globes are also available to add on.

Each gooseneck and barn light shade is an adept commercial fixture for sign, awning and entryway lighting. Use the sturdy back plate to mount outside along a flat surface. Mounting holes are 3 1/2" on center for installation to standard 4" outdoor weatherproof boxes and recessed octagon boxes. Standard lamping configuration is incandescent with a maximum of 200-watts; or upgrade to a choice of CF, MH, HPS or LED lamping. For options not featured online, please call toll free for details and a price quote.

Arm: 54.25” x 18" Ht
Light: 18”Dia. x 12” Ht

If our standard arms are not what your looking for
see our complete list below


Download Guide

Download Sign Bracket Store Arm Configurations

Please call for more information about arm configurations.
1-888-919-7446

Choose your powder coated finish option by changing the the color in the drop down menu below the order box.
Custom Finishes Available for an additional charge.

outdoor Gooseneck light rlm

For more information call the Sign Bracket Store
888-919-7446

Survey and Installation instructions for Gooseneck fixtures

Survey installation area prior to ordering/installing light fixtures

  1. Does local code or landlord allow for this style of light to be installed at desired location?

  2. Is there sufficient clearance above, below or adjacent to the installation location to accommodate sweep and projection of gooseneck arm and shade?

  3. Most gooseneck light fixtures are designed to be installed directly on top of a recessed standard Round or Octagonal Junction box. Are the junction boxes in the desired location? If the junction box(es) are located behind the wall or off to one side are the lead lengths coming out of the fixture long enough to reach? These fixtures can be ordered with longer lead lengths - call for details.

  4. Will the shade, at installed location/elevation, be directing its light at the desired spot on the sign face or wall surface? (if not can the mounting plate location be changed to compensate? Please note, an optional swivel coupling is available that will allow for the shade to be swiveled up/down to more precisely direct the light - call for details)

  5. Do you have a sufficient number of fixtures to light your sign? The general rule of thumb is one fixture for every 3' to 4' of sign width (tall signs may also require fixtures above and below the sign for proper illumination). Size of shade, length of arm, sign artwork and sign size/shape must be considered when determining number of fixtures required. If you are uncertain as to what will be required for your project please call and we'll be happy to help advise on your options.

Installation overview (all electrical installations should be performed by qualified personnel)

  1. Disconnect power at main electrical box, prior to installation.
  2. Verify wires from shade are long enough for the arm and accessories provided.
  3. Feed lead wires through arm and thread shade onto arm.
  4. Insert small gasket into wall plate. Press arm fully into wall plate and tighten set screws. Set large gasket in place.
  5. Make wiring connections according to local and national codes.
  6. Attach wall plate with arm assembly to junction box.
  7. With wall plate mounted, loosen set screws and adjust arm to correct position. After adjustment, place arm in wall plate firmly and tighten set screws.
  8. Use generic silicone sealant to prevent water entry.

Important - End of arm must be square and compress gasket adequately to provide wet location seal.

Gooseneck Installation Diagram







 
OUR COMPANY SHOPPING SERVICES CUSTOMER SERVICE RESOURCES & LINKS STORE DEPARTMENTS
OTHER SPECIALTY PRODUCTS