Hang your one inch sign blanks with our heavy duty wall bracket hardware kit. This kit comes with:
- (2) Extra-long lag eye bolts, black oxide coated
- 1 Foot of black oxide coated jack chain
- (4) black oxide coated "S" hooks
Everything is black oxide coated so you can rest assured that everything will be weather-proof and require no maintenance in the future. Powder coating and painted sign hardware doesn't hold a candle to ours that is finished with black oxide. Drive the two included eye bolts into the top of your business sign (be sure your sign is at least 1" thick!), then you're ready to cut the included chain to the desired length. 3-4" lengths are the most common and the most visually pleasing way to suspend a sign from our blade sign brackets. "S" hooks can be bent closed to help prevent the sign from falling due to wind or to prevent it from disappearing due to theft. Kit is perfect for PVC, wooden and HDU signs over 1" thickness.
"S" Hooks - 1.5" long x 1" wide (open)
Chain - 8 Gauge x 1 ft (approx. 10 links)
Lag Eye Screws - 4 " long x 5/16" thick
Please note: the "S" Hooks in this kit are shipped in the "open" position and must be "closed" by the installer (typically done with pliers or vice grips) during installation to ensure that the chain or "S" Hooks do not come off during breezy conditions or if touched by passersby. In addition, the 1 foot length of chain supplied is intended to be cut (or untwist a link(s)) into two shorter equal length pieces (typically 3" to 4" each) to provide proper clearance from top of sign to bottom of bracket arm. If you have any questions regarding proper installation of this or any of our hardware products please call prior to installation. We're happy to assist with any questions you might have.