Lovely and unique, our 43" Classic Lighted Sign Bracket Kit is the perfect choice for creating a fanciful lighting system in a large area. Consider using it to light large dining rooms and even gazebos or porches. Our 43" Classic Lighted Sign Bracket Kit has been designed with the demands on heavier signs in mind. All of the light fixtures have a powder-coated matte finishing, meaning they'll never rust, corrode, of fade, even when exposed to inclement weather conditions. It comes with default 120V PAR 20 lights, but a 50W low volt bullet light is also available for an additional cost.
If you'd prefer a low-voltage light option, use the drop-down box to the right of the image above to change your lights from a standard PAR20 (120V) version to the MR16 low-voltage option. Please note: the low voltage version of this fixture does include a 50W Halogen 2-pin bulb. A 120v to 12V transformer is required for all low voltage fixtures (included with this option). (Please note: the 120V standard fixtures do not ship with bulbs. These fixtures will accept a PAR20 Medium Base Floodlight commonly available at most hardware or home improvement stores).
Call us for details or to discuss your project requirements.
1-888-919-7446 (We're here M-F, 7:00am-5:00pm PST)
Main bracket arm is 43" wide overall (includes 3" dia. Ball Finial on end of arm)
Mounting Plate: 3"x 14" with a 3/8" dia. hole pre-drilled in each corner* wiring will exit the back plate behind the main arm location and assumes you will have a flush mounted j-box at that location.
Ring Centers: 22" on center (light fixture extension arms are centered between these rings)
Center of ring closest to the wall is 10.5" from the back plate
Extension arms for the light fixtures project out approx. 18" from main arm (alternate arm lengths are available)
Included light fixture housings are approx. 5.5" long x 3" diameter (note: Par 20 bulbs not included)
Bracket only weight = 13.3 lbs
Download the Product Specification.pdf by clicking on the link above for more details.
*Due to the wide range of installation surfaces this item can be applied to and varying local code requirements for electrical connections, installation hardware is not included. We recommend that you have a qualified electrician or sign professional perform the installation and they will determine the appropriate electrical and mounting hardware to be used for your specific application and/or local code requirements. It is also recommended that you check with your landlord, property management company or local officials first to determine if this type of illuminated sign system can be installed at your desired location?