72in. Wide - Architectural Fiberglass Bahama Shutter Storm Rated w/ Optional Hardware Kit

Made to Order
Ships In
8-10 Weeks

Architectural Storm Rated Fiberglass Bahama Shutters

  • Constructed from pultruded structural fiberglass
  • Meets State of Florida Building Code 2006
  • Each shutter has clear 1/8" thick polycarbonate panel fastened to the back
  • Shutter thickness is 1.25", louver angle is 36 degrees
  • Real Louvers are 1.5" Wide (able to see through to back)
  • Optional Bahama Hardware available in Black or Mill finish
  • Comes with camelback clips
  • Limited Lifetime warranty, made in the USA
  • Call us at 800-896-0978 for a quote for almost any size window

Our Storm Rated Fiberglass Bahama shutters bring refreshingly clean, versatile design. Inspired by the elegant functionality of shutters found throughout the Caribbean, Bahama shutters block out intense UV rays that can damage interiors, while allowing soft ambient light and refreshing breezes pass through. Their airy, relaxed design offers a a beautiful storm protection solution. These storm rated Bahama shutters have a limited lifetime warranty and come in a variety of different colors or choose the primed option to paint on site to match a home's trim color. These shutters are a longtime favorite in coastal and tropical locales. They come with a clear 1/8" thick polycarbonate panel fastened to the back and with a camel back locking system to be installed along the sides of the shutter. These camel back clips come with the shutter and can be installed on site. The tilt rods and male hinge are attached to the shutter at the factory. Our Bahama shutters are made in the USA with historically correct mitered corners from marine-grade fiberglass components. Built without any unsightly mechanical fasteners, they are designed to withstand fierce weather like the unrelenting sea spray of coastal climates.

Additional options available include: additional rails, additional vertical mullion, colonial louver spacing, and optional aluminum hardware in the black anodized or the silver mill finish. Hardware kits include male and female hinge, tilt arms, clevis pins, nylon hinges, and camelback clips. Along with the Primed Finish option, we can color match for a $450.00 flat fee. All Architectural Bahama shutters carry a Manufacturer's Lifetime Limited Warranty on the product and the finish. All necessary hardware, made of aluminum & stainless steel, needed for installation can be purchased in black or in mill finish. When installed, Bahama shutter panel will be at a 30 degree angle from the house.

Panels less than 30" wide ship with no vertical mullion. Panels 30" wide to less than 60" wide ship with 1 vertical mullion. Panels 60" wide to less than 90" wide ship with 2 vertical mullions. Panels 90" wide to less than 120" wide ship with 3 vertical mullions.

How to Measure for Bahama Shutters: Window Width + 3" x Window Height + 3" = Width x Height of Panel

Bahama shutters are available 18.5-119"W and 12-119"H. A special shipping crate may be required for oversize shipments and/or any orders shipped outside of the continental United States. An additional charge of $200.00 per crate will apply. Shutters tested to level 'D' large missile impact test (REF. ASTM E1996). ESTM E1996 is a standard specification for performance of storm shutters impacted by windborne debris in hurricanes. This is the test standard required for product approval in the rest of Florida and in International Building Code for use in windborne debris regions for the US, Hawaii, and Caribbean Islands. This standard is not sufficient for opening protection devices in Miami-Dade or Broward counties. These shutters have been designed and tested in accordance with the 2007 Florida building code and the 2006 International building code for use outside the high velocity hurricane zone per ASTM E330, E1886 and E1996 standard. It has been designed to withstand 75 MPH Winds in the open position (19.0 PSF Max windload) and shall be locked in the closed position when the winds exceed 75 MPH.

Call 800-896-0978 for Hurricane Storm Rated Bahama Shutter Pricing Quote

More Information
Length 72"
Height 30", 31", 32", 33", 34", 35", 36", 37", 38", 39", 40", 41", 42", 43", 44", 45", 46", 47", 48", 49", 50", 51", 52", 53", 54", 55", 56", 57", 58", 59", 60", 61", 62", 63", 64", 65", 66", 67", 68", 69", 70", 71", 72", 73", 74", 75", 76", 77", 78", 79", 80"
Style Bahama
Material Fiberglass
Product Specifications
Write Your Own Review
You're reviewing:72in. Wide - Architectural Fiberglass Bahama Shutter Storm Rated w/ Optional Hardware Kit
Your Rating