Home & Garden
Commercial Planters & Artificial Plants
Signage & Lighting
Home > Fire Retardant Plants, Trees, Topiaries & Hedges

Fire Retardant Foliage | Flame Retardant Foliage | Fire Retardant Trees & Hedges

Fire retardant hedges, trees and plants that are sold and/or manufactured by Artificial Plants Unlimited are made from resins that are Inherently Fire Retardant. Also known as IFR plants, they have fire repellent built directly into the plant and tree foliage during the manufacturing process.

The safest Fire and Flame Retardant artificial foliage and trees have the IFR chemicals impregnated in the resin during the injection molding process. This process provides a superior form of fire protection over foliage protected by after-market sprays. The most fire-safe plants are those made using the IFR process and works to ensure your fire retardant foliage and trees will pass state and municipal fire code requirements.

If your design calls for UV protection outdoors vs. indoor fire protection - click the following link to review our Outdoor UV resistant hedges, plants and trees.

Trade discounts and custom sizes available

Hedges - Fire Retardant
Living Walls - Fire Retardant
Trees - Fire Retardant
Vines, Bushes & Flowers - Fire Retardant
Fire Retardant Artificial Cylinder Topiaries
Fire Retardant Artificial Obelisk Topiaries
Fire Retardant Artificial Cone Topiaries
Fire Retardant Artificial Oblong Topiaries

Fire Retardant Foliage FAQ's

Why are fire resistant plants with flame resistant foliage important?
Historically, many fires have been caused by a lack of fire resistance in silk or artificial plants, which are often used in commercial spaces for maintenance and durability reasons. In all of these cases the fires could have been prevented with properly manufactured fire retardant plants and trees. Fortunately, the majority of states now have fire codes for commercial artificial plants to help stop fire related accidents and injuries.

What makes non fire resistant silk plants so dangerous?
Silk foliage branches are made from plastic and polyester fabric. As you might suspect, fabric is easily susceptible to ignition and the plastic burns quite easily. So when ignited, silk plants can spread a fire quickly and the plastic can produce a large amount of deadly smoke.

Who determines whether silk plants must be fire retardant? 
The majority of states have adopted state fire codes that specifically address the laws concerning the use of artificial plants and the fire test requirements they must pass.

What fire resistant tests are required for silk plants? 
The fire tests required can depend on a number of factors but the most commonly cited fire tests are the NFPA 701 and the ASTM E84. Both of these tests are cited by the most adopted state fire codes which are the International Fire Code and the NFPA 1 Fire Code.

What do the silk plant fire tests measure? 
Depending on what test is performed, the test measures the flame propagation and the smoke generation of the material. This data is measured in order to answer a few questions; 1) if the product were to ignite, will the product self extinguish or will it spread the fire and 2) if the product were to ignite how much smoke is created from the product burning.

Who enforces the use of fire resistant silk plants? 
The local fire official having jurisdiction over the project will enforce the building fire code requirements and ensure products comply with the code.

How does the fire official ensure products comply with the code? 
The fire official will require that the product manufacturer supply the appropriate fire test certificate that complies with the fire code. In addition, the fire official may perform a field fire resistance test on the product to validate the certification.

What if I installed non fire resistant plants but they are required? 
From experience, this can be a costly mistake depending on what the fire official requires from you to remedy the situation. The most common scenario we have experienced is the fire official will require all the fire resistant product be removed and replaced with compliant products. This is not only costly because the product must be remade, but can really be costly if the project will not be allowed to open without compliant products.

How is artificial foliage made fire retardant? 
There are two ways to fire retard artificial foliage. The safest and most effective way is to make the foliage fire resistant during the injection molding process. This process blends the fire retardant chemical with the fabric and plastic or PVC parts while the materials are still in raw material form. Once injected, the fire protection is inherent (IFR™ - Inherently Fire Retardant) in the leaves and branches. The other process for fire retarding foliage is a post-production application in which the foliage is treated by spraying or dipping the foliage in fire retardant chemical. See a side by side comparison of these fire safe plant applications to learn more about IFR™

IFR™ (Inherently Fire Retardant) [Pro's]

Topically Treated Fire Retardant Foliage [Con's]

Fire safe chemicals impregnated into the 
plant materials during manufacturing

Will not wash or wear off

Consistent fire protection - California Title 19, US Gov SIN 4722-06, ASTM E84-95 Class A, NFPA 701, NFPA 705

Structurally sound fire retardant plants and trees;  premium grade fire safe plant materials withstand commercial application.

Smooth surface reduces dust build-up

Visually identical compared to standard foliages

Treated by spraying or dipping it in topical fire retardant chemicals

May wash or wear off and requires periodic reapplication

Inconsistent fire protection for artificial plants

May degrade materials, resulting in a wilted appearance

Tacky surface film attracts dust

Appearance may have a spotty or discolored film



FAQ's courtesy of Commercial Silk