Home & Garden
Commercial Planters & Artificial Plants
Signage & Lighting
Home > Architectural Sign Brackets > Lighted Wall Mount Sign Brackets > 30in. Torino Illuminata Sign Bracket Kit

30in. Torino Illuminata Sign Bracket Kit

Ships In:  
Usually ships in 1-3 weeks, call for availability
In Stock
Main bracket arm is 30" wide overall (includes 3" dia. Ball Finial on end of arm)
Installation Hardware Not Included

Want your sign to be stylish and easy to spot both day and night? The Torino Illuminata Sign Bracket Kit is the perfect solution. Inspired by Italian design, this elegant steel mounting bracket has a 30-inch arm with a scrollwork flourish and a black iron ball finial. A bar mounted with two bullet lights is integrated onto the bracket for evening illumination. You can opt for traditional PAR20 120-volt lights or lMR16 low-voltage halogen lights. A transformer is included with the design. Both the lights and the bracket are finished with black powder coating. The bracket is ultra strong and 3 inches wide.

If you'd prefer a low-voltage light option, use the drop-down box to the right of the image above to change your lights from a standard PAR20 (120V) version to the MR16 low-voltage option. Please note: the low voltage version of this fixture does include a 50W Halogen 2-pin bulb. A 120v to 12V transformer is required for all low voltage fixtures (included with this option). (Please note: the 120V standard fixtures do not ship with bulbs. These fixtures will accept a PAR20 Medium Base Floodlight commonly available at most hardware or home improvement stores).

Call us for details or to discuss your project requirements.
1-888-919-7446 (We're here M-F, 7:00am-5:00pm PST)

Main bracket arm is 30" wide overall (includes 3" dia. Ball Finial on end of arm)

Mounting Plate: 3"x12" with a 3/8" dia. hole pre-drilled in each corner* wiring will exit the back plate behind the main arm location and assumes you will have a flush mounted j-box at that location.

Ring Centers: 14" on center (light fixture extension arms are centered between these rings)
Center of ring closest to the wall is 8" from the back plate

Extension arms for the light fixtures project out approx. 12" from main arm (alternate arm lengths are available)

Included light fixture housings are approx. 5.5" long x 3" diameter (note: Par 20 bulbs not included)

Bracket only weight = 8 lbs

Download the Product Specification.pdf by clicking on the link above for more details.

*Due to the wide range of installation surfaces this item can be applied to and varying local code requirements for electrical connections, installation hardware is not included. We recommend that you have a qualified electrician or sign professional perform the installation and they will determine the appropriate electrical and mounting hardware to be used for your specific application and/or local code requirements. It is also recommended that you check with your landlord, property management company or local officials first to determine if this type of illuminated sign system can be installed at your desired location?