54" XL Hampton Premier Window Box w/ *Easy Up* Cleat Mounting System

Window Box Size: 54"L x 10.5"W x 9.5"H (not including trim on top & bottom of box)
Exterior Box Dimensions including Trim: 57"L x 12"W x 10"H
Interior Planting Dimensions: 53.5"L x 9.0"W x 9.0"H.

Most window boxes look best when just beyond the outer edge of your window trim or up to the midpoint of your shutters (as pictured).  The top molding on the Hampton extends 1.5 inches in each direction beyond the base of the window box.

Our Petite, Standard and XL sizes are differentiated by their width and height as shown below. You are currently considering an XL size box.  Please call us if you require a custom size 800-896-0978.

Add Two-(2) 24" Drop-In PlanterWell Reservoir by using the drop-down menu above the "Add to Cart" button.
These rectangular "PlanterWell" Self Watering Reservoirs are a perfect solution to make your new or existing window boxes or planters easier to maintain.

With our wide selection of sizes and custom configurations "PlanterWell" self watering reservoirs can be designed to irrigate almost any size window box or planter. Each "PlanterWell" self watering reservoir can be used by itself or in conjunction with other "Planter Well" self watering reservoirs to create a self irrigating window box or planter.

Not only do "PlanterWell" self watering reservoirs reduce the times that a planter needs to be watered it also improves plant growth and reduces water usage. Each Planter Well will irrigate 9" of soil beyond it's edge, so two 24" reservoir will keep the soil moist in a window box or planter that is 54" long.

Click Here for our guide to installing Cleat Mount Composite Window Boxes.

Installation guidelines can be found by clicking on the link named "Installation Guides" in either the dark green band at the top of each page or the light blue link in the left margin at the bottom of each page.

Please Note: We sell mounting bolts for our composite window boxes separately and can be found on the right side of each product page or on our "Window Box Brackets & Bolts" web page. The reason we don't automatically supply bolts and hardware is due to the many different types of walls and siding used throughout the U.S. Your bolt requirements will vary based on the type of wall or siding your home or office has. All of our "Standard" size composite window boxes come with an innovative cleat mounting system that allows you to mount the single composite cleat to your home and then neatly hang the window box. All of our Iron and Aluminum window box cages and hayrack troughs come with pre-drilled 1/4" holes on the back of the cage. Mounting brackets that offer both structural support and add decorative detail are available but also sold separately.

For composite window boxes we recommend you mount them directly to your wall (vs. a bracket) using 3/8" diameter X 3 1/2" long bolts for wood and stucco siding but only when fully secured to the framing studs inside of the wall. Lag shields should be added with the lag bolts when mounting in brick, masonry or block.

For Iron Cages, Aluminum Cages and Hayrack Trough Window Baskets, we recommend (and sell separately) 1/4" diameter x 3" long lag bolts (and of course lag shields for brick, masonry or block).

We urge you to consult your local hardware store, handyman or licensed contractor for more specific direction if required.